Tips for greener motoring

Your driving habits, the type of vehicle you drive and the conditions under which you drive will affect your vehicle's environmental performance. Follow these tips for greener driving.

Minimize your vehicle use :
Think about your travel needs prior to your travel. Planned travel decisions will result in fewer trips and more efficient/cheaper travel than unplanned decisions made 'on the go'. Some travel planning tips:

• Plan to do a number of errands in one trip rather than several trips and save both time and fuel (for the first couple of minutes of a car trip the engine is cold and this results in an increase in fuel consumption per kilometer).
• Patronize shops near to you whenever possible to reduce the distances you travel by car. Walk or cycle to your local shops if you can.
• Avoid peak-hour traffic whenever possible.
• Use alternative transport, eg. public transport (bus, train, tram or ferry), walking or cycling. These alternative methods of travel are often cheaper, and may provide other benefits including increased fitness.

Drive in high gear :
The engine runs most efficiently between around 1,500 and 2,500 rpm (lower in diesels). To maintain these low revs you should change up through the gears as soon as practical and before the revs reach 2,500 rpm. Automatic transmissions will shift up more quickly and smoothly if you ease back slightly on the accelerator once the car gathers momentum.

Drive smoothly - avoid unnecessary acceleration :
Drive at a good distance from the car in front so you can anticipate and travel with the flow of traffic. You will be able to see such things as traffic lights changing or cars turning and minimise your fuel use through braking and accelerating back up to full speed.

Minimize fuel wasted in idling :
Minimize fuel wasted in idling by stopping the engine whenever your car is stopped or held up for an extended period of time. By having the engine switched off, even for a short period, you will save more fuel than is lost from the burst of fuel involved in restarting the engine. The net increased wear and tear from this practice is negligible.

Speed kills economy :
High speeds result in high fuel consumption. At 110 km/h your car can use up to 25% more fuel than it would cruising at 90 km/h.

Minimize aerodynamic drag :
Additional parts on the exterior of a vehicle such as roof racks and spoilers, or having the window open, increases air resistance and fuel consumption, in some cases by over 20%.

Look after your vehicle's tyres :
Inflate your vehicle's tyres to the highest pressure recommended by the tyre manufacturer and make sure your wheels are properly aligned (remember to keep your spare tire inflated as well). Looking after your tyres will not only reduce your fuel consumption it will also extend tyre life and improve handling.

Use air conditioning sparingly :
Air conditioners can use extra fuel when operating. However, at speeds of over 80 km/h, the use of air conditioning is better for fuel consumption than an open window.

Travel light :
Don't carry more people or cargo than you have to. The more a vehicle carries the more fuel it uses; an extra 50kg of weight can increase your fuel bill by around 2%.
Service your vehicle regularly

Keeping your vehicle well tuned will minimize its environmental impact.

Choose a Qualified Dealer to Modify Your Vehicle

Even a half inch change in the lowering of a van floor can affect a driver's ability to use equipment or to have an unobstructed view of the road; so, take time to find a qualified dealer to modify your vehicle. Begin with a phone inquiry to find out about credentials, experience, and references. Ask questions about how they operate. Do they work with evaluators? Will they look at your vehicle before you purchase it? Do they require a prescription from a physician or other driver evaluation specialist? How long will it take before they can start work on your vehicle? Do they provide training on how to use the adaptive equipment? If you are satisfied with the answers you receive, check references; then arrange to visit the dealer's facility. Additional information to consider is listed below.

Are they members of the National Mobility Equipment Dealers Association (NMEDA) or another organization that has vehicle conversion standards?

• What type of training has the staff received?
• What type of warranty do they provide on their work?
• Do they provide ongoing service and maintenance?
• Do they stock replacement parts?

Once you are comfortable with the dealer's qualifications, you will want to ask specific questions, such as:

• How much will the modification cost?
• Will they accept third party payment?
• How long will it take to modify the vehicle?
• Can the equipment be transferred to a new vehicle in the future?
• Will they need to modify existing safety features to install the adaptive equipment?

While your vehicle is being modified, you will, most likely, need to be available for fittings. This avoids additional waiting time for adjustments once the equipment is fully installed. Without proper fittings you may have problems with the safe operation of the vehicle and have to go back for adjustments.

Tire Maintenance

There is a close working relationship between your tires and other mechanical systems in your vehicle, such as the wheels, brakes, shock absorbers, steering and suspension systems. To ensure you have a safe, comfortable ride and good tire mileage, click on the areas of interest below.

Tire Size
To maintain tire safety, purchase new tires that are the same size as the vehicle's original tires or another size recommended by the manufacturer. Look at the tire information placard, the owner's manual, or the sidewall of the tire you are replacing to find this information. If you have any doubt about the correct size to choose, consult with the tire dealer.

Tire Tread
The tire tread provides the gripping action and traction that prevent your vehicle from slipping or sliding, especially when the road is wet or icy. In general, tires are not safe and should be replaced when the tread is worn down to 1/16 of an inch. Tires have built-in treadwear indicators that let you know when it is time to replace your tires. These indicators are raised sections spaced intermittently in the bottom of the tread grooves. When they appear "even" with the outside of the tread, it is time to replace your tires.

Another method for checking tread depth is to place a penny in the tread with Lincoln's head upside down and facing you. If you can see the top of Lincoln's head, you are ready for new tires. The tread on this tire covers the top of Lincoln's head, so it's not yet ready for replacement.


Balance & Alignment
To avoid vibration or shaking of the vehicle when a tire rotates, the tire must be properly balanced. This balance is achieved by positioning weights on the wheel to counterbalance heavy spots on the wheel-and-tire assembly.

A wheel alignment adjusts the angles of the wheels so that they are positioned correctly relative to the vehicle's frame. This adjustment maximizes the life of your tires and prevents your car from veering to the right or left when driving on a straight, level road.

These adjustments require special equipment and should be performed by a qualified technician.

Rotation
Rotating tires from front to back and from side to side can reduce irregular wear (for vehicles that have tires that are all the same size). Look in your owner's manual for information on how frequently the tires on your vehicle should be rotated and the best pattern for rotation.

Repair
A plug by itself is not an acceptable repair.

The proper repair of a punctured tire requires a plug for the hole and a patch for the area inside the tire that surrounds the puncture hole. The repair material used - for example, a “combination patch and plug” repair - must seal the inner liner and fill the injury to be considered a permanent repair.

Punctures through the tread can be repaired if they are not too large, but punctures to the sidewall should not be repaired.

Tires must be removed from the rim to be properly inspected before being plugged and patched.

Driving More Efficiently

Drive Sensibly
Aggressive driving (speeding, rapid acceleration and braking) wastes gas. It can lower your gas mileage by 33 percent at highway speeds and by 5 percent around town. Sensible driving is also safer for you and others, so you may save more than gas money.
Fuel Economy Benefit : 5-33%
Equivalent Gasoline Savings : $0.08-$0.55/gallon

Observe the Speed Limit
While each vehicle reaches its optimal fuel economy at a different speed (or range of speeds), gas mileage usually decreases rapidly at speeds above 60 mph.
You can assume that each 5 mph you drive over 60 mph is like paying an additional $0.24 per gallon for gas. Observing the speed limit is also safer.
Fuel Economy Benefit : 7-23%
Equivalent Gasoline Savings : $0.12-$0.38/gallon


Remove Excess Weight
Avoid keeping unnecessary items in your vehicle, especially heavy ones. An extra 100 pounds in your vehicle could reduce your MPG by up to 2%. The reduction is based on the percentage of extra weight relative to the vehicle's weight and affects smaller vehicles more than larger ones.
Fuel Economy Benefit : 1-2%/100 lbs
Equivalent Gasoline Savings: $0.02-$0.03/gallon

Avoid Excessive Idling
Idling gets 0 miles per gallon. Cars with larger engines typically waste more gas at idle than do cars with smaller engines.

Use Cruise Control
Using cruise control on the highway helps you maintain a constant speed and, in most cases, will save gas.

Use Overdrive Gears
When you use overdrive gearing, your car's engine speed goes down. This saves gas and reduces engine wear.

what are HEVs?

Hybrid-electric vehicles (HEVs) combine the benefits of gasoline engines and electric motors and can be configured to obtain different objectives, such as improved fuel economy, increased power, or additional auxiliary power for electronic devices and power tools, also known as HEVs or hybrids. Present-day hybrids are equipped with ICEs and electric motors. A hybrid's ICE engine, as in any ICE-powered car, produces power through continuous, controlled explosions that push down pistons connected to a rotating crankshaft. That rotating force (torque) is ultimately transmitted to the vehicle's wheels.

A hybrid's electric motor is energized by a battery, which produces power through a chemical reaction. The battery is continuously recharged by a generator that—like the alternator of a conventional car—is driven by the ICE.

Hybrids can have a parallel design, a series design, or a combination of both:

• In a parallel design, the energy conversion unit and electric propulsion system are connected directly to the vehicle's wheels. The primary engine is used for highway driving; the electric motor provides added power during hill climbs, acceleration, and other periods of high demand.
  
• In a series design, the primary engine is connected to a generator that produces electricity. The electricity charges the batteries, which drive an electric motor that powers the wheels. HEVs can also be built to use the series configuration at low speeds and the parallel configuration for highway driving and acceleration.

Some of the advanced technologies typically used by hybrids include

• Regenerative BrakingThe electric motor applies resistance to the drivetrain causing the wheels to slow down. In return, the energy from the wheels turns the motor, which functions as a generator, converting energy normally wasted during coasting and braking into electricity, which is stored in a battery until needed by the electric motor.
  
• Electric Motor Drive/Assist
  The electric motor provides additional power to assist the engine in accelerating, passing, or hill climbing. This allows a smaller, more efficient engine to be used. In some vehicles, the motor alone provides power for low-speed driving conditions where internal combustion engines are least efficient.
  
• Automatic Start/Shutoff
  Automatically shuts off the engine when the vehicle comes to a stop and restarts it when the accelerator is pressed. This prevents wasted energy from idling.

Signs and Signals In Road Transport

Signs
Traffic signs and signals are an essential part of the road traffic system. Paying attention to traffic signs helps you move around safely and efficiently. There are three types of traffic signs:

• regulatory signs
• warning signs
• guide signs

Regulatory signs
You must obey the instructions on these signs.

Stop
Stop and give way to all other vehicles approaching, entering or already on the intersection. If you turn at the intersection, you must also give way to pedestrians crossing the road you are entering.

Give way
Slow down or stop and give way to all other vehicles approaching, entering or already on the intersection. If you turn at the intersection, you must also give way to pedestrians crossing the road you are entering.

Roundabout
Slow down or stop and give way to all vehicles on the roundabout.

No turns
Do not turn right or left or make a U-turn at the intersection—you must only drive in the direction indicated by the arrow.

No entry
Do not drive onto the road beyond this sign.

No U-turn
Do not make a U-turn here.

No left turn
Do not turn left at the intersection.

No right turn
Do not turn right or do a u-turn at the intersection. Keep left You must drive to the left of this sign.

One way
You must drive only in the direction indicated by the arrow.

No overtaking or passing
Overtaking or passing another vehicle is not allowed from the NO OVERTAKING OR PASSING sign to: a distance past the sign indicated on the sign the end of the bridge, if the sign applies to a bridge an END NO OVERTAKING OR PASSING sign.

Wrong way – go back
This sign warns you that you are driving in the wrong direction along an exit ramp of a motorway.

Trucks & must drive in gear low
Trucks and buses must drive in a gear low enough to limit their speed without relying on the primary brake. Used on steep routes.

Keep left unless overtaking
When you drive past this sign on a multi-lane road, you must not drive in the right lane unless overtaking, turning right, making a U-turn, avoiding an obstacle or driving in congested traffic.

Two way
Vehicles travel in both directions on this road.